Thermostat and Housing Assembly

Figure 5-2. Thermostat and Housing Assembly, Repair.

TM-5-4310-379-14 Compressor Air Reciprocating Electric Motor Driven Reciprocating Electric Motor Driven 15 CFM at 175 PSI Manual
Page Navigation
382

TM 5-4310-379-14 5-8. Thermostat and Housing Assembly. This task covers: Repair INITIAL SETUP Tools Equipment Condition General Mechanic's Tool Kit (NSN 5180-00-177-7033) Thermostat and housing assembly removed Torch Outfit, Cutting and Welding (para. 3-21). (NSN 3433-00-026-4718) Wrench, Torque (NSN 5120-00-554-7292) Materials/Parts Thermostat Housing Gasket Solvent, Dry Cleaning (Item 23, Appendix D) Rags, Wiping (Item 21, Appendix D) Repair. (figure 5-2) (1) Remove two screws (1) and lockwashers (2) and remove upper thermostat housing (3), gasket (4), and thermostat (5). WARNING Dry cleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and property. Avoid repeated and prolonged skin contact. Do not use near open flame or excessive heat. Flash point of solvent is 100-138°F (38-60°C). (2) Clean all items with dry cleaning solvent and dry thoroughly. (3) Inspect thermostat (5) and replace if cracked, bent, or otherwise damaged. (4) Inspect upper thermostat housing (3) and lower thermostat housing (6) and repair minor cracks by welding or replace a damaged item. (5) Ensure all gasket surfaces are clean and old gasket material removed. (6) Install thermostat (5), gasket (4), and upper thermostat housing (3) and secure with two screws (1) and lockwashers (2). Torque screws to 13-17 Ib-ft (18-23 Nm). 5-8

Privacy Statement
Press Release
Contact