TM 5-4310-379-14
Figure 5-24. Cylinder Liner, Inspect.
NOTE
Taper must not exceed .002 in. (.005 cm) and the out-of-round not to exceed .003 in. (.007 cm).
(6)
Check liner for taper and out-of-round. If out-of-rounds exceeds .003 in. (.007 cm), rotate liner 90 in the block,
bore and recheck.
(7)
If liner is cracked, excessively score, damage or out of tolerance between outside diameter of liner and cylinder
bore, replace with new or oversize liner as indicated in Tables 5-4 and 5-5.
5-81