TM 5-4310-380-13
3-23. CHECK VALVE - Continued.
b. Cleaning - Continued.
(2) Clean using a clean, soft cloth (Appendix E, item 3) or a medium bristle brush (Appendix E, item 4) and
cleaning solvent (Appendix E, item 2).
(3) Allow to dry.
c. Inspection.
(1) Inspect for stripped threads.
(2) Inspect for signs of obvious damage.
d. Repair. Replace a defective check valve.
e. Installation. (Refer to Figure 3-32).
NOTE
Apply piping compound (Appendix E, item 7) on all threads.
Figure 3-32. Check Valve, Installation.
(1) Install check valve (5).
(2) Install elbow (4).
(3) Install compression fitting (3).
(4) Connect pressure switch unloader tube (2).
(5) Connect input tube (1) from compressor.
END OF TASK
3-57
