TM 5-4310-382-13
Figure 3-25. Governor Linkage and Throttle Linkage, Removal.
b. Cleaning.
(1) Remove build up of dirt or debris from all metallic surfaces.
WARNING
DO NOT breathe cleaning solvent vapors for long periods of time or use solvent
near open flames. To avoid illness, explosion, or fire, only use solvent in well
ventilated areas away from open flames.
(2) Clean all parts with a clean, soft cloth (item 3, Appendix E) or a medium bristle brush (item 4, Appendix E)
and cleaning solvent (item 2, Appendix E).
(3) Allow parts to dry.
3-57
