TM 5-4310-382-13
Figure 3-30. Air Cleaner Assembly, Removal.
b. Cleaning.
(1) Clean all build up of dirt and debris from body and body latches.
WARNING
DO NOT breathe cleaning solvent vapors for long periods of time or use solvent
near open flames. To avoid illness, explosion, or fire, only use solvent in well
ventilated areas away from open flames.
(2) Clean all metal parts with a clean, soft cloth (item 3, Appendix E) or medium bristle brush (item 4, Appendix
NOTE
Do not try to clean strainer element. Replace strainer elements if dirty.
(3) Allow parts to dry.
c. Inspection.
(1) Examine body and cover for cracks or dents. Check latches for bent wires. Replace body if it is cracked or
dented, or if latches are damaged.
3-65
