TM 5-4310-382-13
3-31. TUBE ASSEMBLIES - Continued.
a. Removal.
(1) Loosen nut (3) from tee (2) and nut (5) from elbow (6) and remove tubing (4) from compressor (12).
(2) Remove nut (25), two lockwashers (24), and two screws (23) to loosen two tubing clips (22).
(3) loosen nut (1) from tee (2) and nut (18) from elbow (19) and remove tubing (21) and two tube clips (22)
attached to tubing.
(4) Remove two tube clips (22) from tubing (21).
(5) Loosen nut (8) from elbow (7) and nut (14) from fitting (15) and remove tube (13).
(6) Remove fitting (15) from check valve (16) and check valve from air tank (17).
(7) Remove tee (2) and elbow (6).
(8) Remove two clamps (9) and hose (20).
(9) Remove barbed fitting (10) from slow down device (11).
Figure 3-34. Tube Assemblies, Removal.
3-70
