TM 5-4310-382-13
4-3. CARBURETOR.
This task covers:
a. Removal
b. Cleaning
c. Inspection
d. Assembly
INITIAL SETUP
Tools Required
Tool Kit, General Mechanic's
Materials Required
Solvent, Dry Cleaning (item 2, Appendix E)
Cloth, Lint Free (item 3, Appendix E)
Brush, Medium Bristle (item 4, Appendix E)
Equipment Condition
Engine shut down and cool.
Carburetor removed (see para 3-21).
a. Disassembly.
(1) Remove idle needle valve (2) from upper carburetor (3).
(2) Remove high speed needle valve screw (7), packing nut (6), gasket (8), and nozzle (9) from lower carburetor
(5).
(3) Remove four screws (1) and remove upper carburetor (3) and gasket (4) from lower carburetor (5).
Figure 4-1. Carburetor, Disassembly.
4-4
