TM 5-4310-382-13
4-5. COMPRESSOR PISTONS AND CONNECTING RODS - Continued.
e. Installation.
(1) Install ring (12) and three rings (9) onto second stage piston (13).
(2) Place second stage piston (13) onto second stage connecting rod (14) and install pin (11) and two snap rings
(10).
(3) Install ring (6) and two rings (5) onto first stage piston (30).
(4) Place first stage piston (30) onto first stage connecting rod (28) and install pin (7) and two snap rings (8).
(5) Place upper bearing (16), second stage piston (13) and second stage rod (14) onto crankshaft (24).
NOTE
Aline marks on rod and rod cap when assembling rods to crankshaft.
(6) Install lower bearing (17), rod cap (18), two washers (19), two screws (20), and two nuts (15). Torque per
(7) Place upper bearing (25), first stage piston (30) and first stage rod (28) onto crankshaft (24).
(8) Install lower bearing (17), rod cap (23), two washers (22), two screws (21), and two nuts (26). Torque per
(9) Place packing (4) onto top of compressor crankcase (31).
(10) Compress rings on first and second stage pistons and install cylinder (1) onto compressor crankcase (31).
(11) Install twelve washers (3) and six screws (2) into cylinder (1). Torque per Appendix F.
(12) Install cylinder head (see para 4-4).
(13) Install cylinder head tubing assemblies (see para 3-31).
(14) Refill compressor with oil (see para 3-2).
4-18
