TM 5-4310-384-13
Table 2-1. Operator's Preventive Maintenance Checks and Services (Continued)
B
-
Before Operation
D
-
During Operation
A
-
After Operation
W
-
Weekly
a.
Inspect foam air filters (1) and felt silencers (2)
Dirty or obstructed
for dirt or debris. Clean with P-D-680 as necessary
filters.
and install.
b.
Inspect the safety interstage valve (3) during
Air release from valve
operation for air release. Air release indicates
during operation.
crimped intercooler or compressor damage.
c.
Inspect oil level through sight glass (4).
Oil level is not seen
on sight glass.
d.
Inspect drain plug (5) and fill plug (6) for
Plugs are loose.
tightness.
e.
Inspect intercooler (7) for cracks, dents, broken
Loose or damaged
cooling fins, and secure fitting attachment.
intercooler.
3
ELECTRIC MOTOR
a.
Check mounting bolts (1) for tightness.
Loose mounting bolts.
b.
Inspect end plates (2) for clogged vents, dirt, or
Plugged vents.
debris.
ITEM
NO.
INTERVAL
ITEM TO BE INSPECTED. PROCEDURE:
EQUIPMENT NOT
READY/AVAILABLE IF:
B D A W
2-5
