TM 5-4310-384-13
REMOVAL.
a.
Remove wire wrap (1) from capillary (2).
b.
Disconnect wires (3) from thermostat (4).
c.
Remove screws (5) and thermostat (4).
d.
Remove thermostat sensor bulb (6) from heater block assembly (7).
e.
Carefully pull bulb and capillary through opening in motor starter enclosure (8).
INSTALLATION.
a.
Carefully feed the thermostat sensor bulb (6) and capillary (2) through hole in motor starter enclosure (8).
b.
Install thermostat (4) and screws (5) in enclosure.
c.
Insert thermostat sensor bulb (6) into heater block assembly (7).
d.
Connect wires (3) to thermostat (4).
e.
Install wire wrap (1) around capillary (2).
3-21
