TM 5-4310-384-13
REMOVAL.
WARNING
Disconnect main power and turn compressor unit off before performing maintenance procedures.
a.
Remove oil drain cap (1) and drain oil into a suitable container (minimum 16 oz., .5 L).
b.
Remove drain pipe (2).
c.
Remove fill plug (3).
INSTALLATION.
a.
Install drain pipe (2) to compressor crankcase.
b.
Install drain cap (1).
c.
Fill crankcase with 16 oz. (.5 L) of OE-30 oil (or equivalent). Check level on sight glass.
d.
Replace fill plug (3).
e.
Connect main power and perform operational check.
3-37
