TM 5-4310-384-13
INSPECTION.
WARNING
Disconnect main power and turn compressor unit off before performing maintenance services.
a.
Inspect the intercooler tubing (1) for cracks, dents, or crimping.
b.
Using soap solution, inspect the intercooler fittings (2) at the cylinder heads (3) for leaks.
REMOVAL.
a.
Disconnect main power and turn compressor switch OFF.
b.
Remove the belt guard cover. Refer to paragraph 3-23.
c.
Remove the V-belts. Refer to paragraph 3-24.
d.
Remove the flywheel. Refer to paragraph 3-30.
e.
Remove wing nuts (4) and rain guards (5).
CAUTION
Be careful not to bend tubing when removing.
f.
Remove the intercooler tubing (1) at the cylinder head fittings (2).
INSTALLATION.
a.
Install the intercooler tubing (1) at the cylinder head fittings (2).
b.
Install rain guards (5) with wing nuts (4).
c.
Install the flywheel. Refer to paragraph 3-30.
d.
Install the V-belts. Refer to paragraph 3-24.
e.
Install the belt guard cover. Refer to paragraph 3-23.
f.
Connect the main power.
3-41
