TM 5-4310-385-13
REMOVAL.
WARNING
Disconnect main power and turn compressor unit off before performing
maintenance procedures.
a.
Remove oil drain cap (1) and drain oil into a suitable container (minimum 10 oz., .3 L).
b.
Remove drain pipe (2) from elbow (3).
c.
Remove elbow (3).
d.
Remove drain plug (4) on opposite side.
e.
Remove fill plugs (5).
INSTALLATION.
a.
Install pipe elbow (3) to compressor crankcase.
b.
Install drain pipe (2) and drain cap (1).
c.
Install drain plug (4) on opposite side.
d.
Fill crankcase with 10 oz. (.3 L) of OE-30 oil (or equivalent). Check level on sight glass.
e.
Replace fill plugs (5).
f.
Connect main power and perform operational check.
3-30