TM 5-4310-385-13
INSPECTION.
WARNING
Disconnect main power and turn compressor unit off before performing
maintenance services.
a.
Inspect the intercooler tubing (1) for cracks, dents, or crimping.
b.
Using soap solution, inspect the intercooler fittings (2) at the cylinder heads (3) for leaks.
REMOVAL
a.
Disconnect main power and turn compressor switch OFF.
b.
Remove the belt guard. Refer to paragraph 3-23.
c.
Remove the V-belts. Refer to paragraph 3-24.
d.
Remove the flywheel. Refer to paragraph 3-30.
CAUTION
Be careful not to bend tubing when removing.
e.
Remove the intercooler tubing (1) at the cylinder head fittings (2).
INSTALLATION.
a.
Install the intercooler tubing (1) at the cylinder head fittings (2).
b.
Install the flywheel. Refer to paragraph 3-30.
c.
Install the V-belts. Refer to paragraph 3-24.
d.
Install the belt guard. Refer to paragraph 3-23.
e.
Connect the main power.
3-34
