TM 5-4310-385-13
3-43. INFLATOR GAUGE. This task covers:
a. Initial Setup.
b. Removal.
c. Installation.
INITIAL SETUP.
a.
Tools. General Mechanic Automotive Tool Set, T1 5180-00-177-7033.
b.
Equipment Condition. Main power disconnected; Compressor unit OFF; Shutoff valve closed or air in tank
discharged.
c.
General Safety Requirements.
WARNING
·
Observe all Warnings and Cautions.
·
Never wear loose clothing or jewelry while inspecting or servicing equipment.
·
Beware of rotating shafts, pulleys and fans which could entrap personnel and
cause serious injury.
REMOVAL.
a.
Turn compressor switch OFF.
WARNING
Shutoff valve must be closed or air in tank must be discharged before removal of
inflator gage. Removal under pressure could cause serious injury.
b.
Turn shutoff valve (1) clockwise to close air supply.
WARNING
Air in hoses must be discharged before removing inflator gage.
c.
Depress lever (2) to discharge any air pressure in hose (3).
d.
Remove inflator gage (4) at hose fittings (5).
INSTALLATION.
a.
Attach inflator gage (4) to hose fittings (5).
b.
Turn shutoff valve (1) clockwise to open air supply.
c.
Turn compressor unit ON, run compressor, and check for leaks.
3-57
