TM 5-4310-386-14
4-48. Starting Aid.
This task covers:
a.
Replace
b.
Repair
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Materials/Parts
Starting Aid
Solvent, Dry Cleaning (Item 24, Appendix E)
Rags, Wiping (Item 21, Appendix E)
a. Replace. (figure 4-62)
(1)
Loosen fitting nut (1) and remove line (2).
(2)
Remove fitting (3) and (4), from intake manifold (5).
(3)
Loosen two fitting nuts (6) and remove lines (2) and (7).
(4)
Remove two fittings (8) and remove reservoir (9).
(5)
Remove knob (10) and locknut (11) and remove hand pump (12).
(6)
Loosen fitting nut (13) and remove line (7).
(7)
Install line (7) on pump (12) and tighten fitting nut (13).
(8)
Install hand pump (12) and secure with locknut (11).
(9)
Install knob (10).
(10)
Install reservoir (9) and secure with two fittings (8).
(11)
Install lines (2) and (7) and tighten two fitting nuts (6).
(12)
Install fitting (3) and (4) on intake manifold (5).
(13)
Install line (2) and tighten fitting nut (1).
4-150
