TM 5-4310-386-14
4-47. Starter.
This task covers:
a.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Negative battery cable disconnected.
Materials/Parts
Starter
Replace. (figure 4-61)
WARNING
Always remove negative cable before working on compressor to prevent possible
injury to personnel.
(1)
Remove nut (1) and tag and remove wire (2), negative cable (3), two lockwashers (4), and nut (5).
(2)
Remove nut (6), lockwasher (7), and remove wire (8).
(3)
Remove screw (9) and tag and remove wire (10).
(4)
Remove two bolts (11), washers (12), and bracket (13) and remove starter (14) from engine (15).
(5)
Install starter (14) and secure with two bolts (11), washers (12), and one bracket (13).
(6)
Install wire (10) and secure with screw (9).
(7)
Install wire (8) and secure with lockwasher (7) and nut (6).
(8)
Install two lockwashers (4), nut (5), negative cable (3), wire (2), and secure with nut (1).
4-148
