TM 5-4310-386-14
4-51. Engine Lube Oil Cooler (Cont).
b. Replace. (figure 4-70)
(1)
Remove four screws (1), washers (2), securing lube oil cooler (3) to engine (4).
(2)
Remove pin (5) from arm (6) and rotate arm until oil cooler (3) clears for removal.
(3)
Place suitable container under oil cooler (3) and remove oil cooler (3) and bracket (7) from engine (4).
(4)
Remove oil pipe (8) and preformed packing (9). Discard preformed packing.
(5)
Install preformed packing (9) coated with grease in the oil cooler (3).
(6)
Install oil pipe (8) into oil cooler (3).
(7)
Install oil cooler (3) on engine (4) so that oil pipe (8) enters the oilway in the crankcase.
(8)
Install bracket (7) and secure with four screws (1) and washers (2).
(9)
Position arm (6) and install pin (5) into arm.
4-164