TM 5-4310-386-14
4-53. Engine Mounts .
This task covers:
a.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Beltguard removed (para. 4-15).
Drive belt removed (para. 4-20).
Materials/Parts
Engine Mounts
Replace. (figure 4-72)
(1)
Support engine (1) with suitable lifting device.
(2)
Remove two nuts (2), lockwashers (3), washers (4), and bolts (5).
(3)
Remove two bolts (6) and washers (7).
(4)
Remove rear engine mount (8).
(5)
Remove two nuts (9), lockwashers (10), washers (11), and bolts (12).
(6)
Remove two nuts (13).
(7)
Remove front engine mount (14).
(8)
Install front engine mount (14).
(9)
Install two nuts (13).
(10)
Install two bolts (12), washers (11), lockwashers (10), and nuts (9).
(11)
Install rear engine mount(8).
(12)
Install two bolts (6) and washers (7).
(13)
Install two bolts (5), washers (4), lockwashers (3), and nuts (2).
FOLLOW-ON MAINTENANCE
(1) Install drive belt (para. 4-15).
(2) Install beltguard (para. 4-20).
4-168
