TM 5-4310-386-14 CAUTION Isopropyl alcohol shall be maintained in a covered container to preclude excess concentrations in the air for fire protection.  The cover should be removed only for placement or removal of soft goods. NOTE Table  4-5  lists  all  compatible  cleaning  agents  for  general  soft  goods  used  in  the  Army  diving systems.  Only the isopropyl alcohol procedure is listed below. a.  Soak component soft goods or aluminum parts in a tray of isopropyl alcohol for 10 minutes maximum. b.    Wipe  each  piece  of  soft  good  individually  with  wipes  soaked  in  isopropyl  alcohol.    Do  this  until  all  dirt  and foreign matter is visually removed. c.  Rinse soft goods with fresh isopropyl alcohol. d.  Blow dry with air, nitrogen, or helium. Table 4-5.  Cleaning Agents Comparable with Soft Goods . Freon PCA TSP NID IA Soft Goods MIL-C-81302B O-S-642 MIL-D-16791 TI-I-735A Adiprene C X X Adiprene L X X Buna N X X X X Buna S X X X X Butyl X X Delrin X X X Epoxy Resin X X Kel-f X X X X Hypalon 40 X X Kralartic X X Lexan X X Lucite X X Neoprene W X X Nylon X X Polyethylene 7050 X X X X 4-176