TM 5-4310-386-14
5-34. Lube Oil Line.
This task covers:
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
V-belts removed (para. 4-41).
Retainer (PN 0030446)
Angle-of-Turn Indicator (PN 0031102)
Reference
Materials/Parts
Refer to Appendix F for torque values.
Lube Oil Line Assembly
Sealing Rings
Replace. (figure 5-51)
(1)
Remove nut (1) from V-belt pulley (2).
(2)
Using retainer, remove V-belt pulley (2).
(3)
Remove ten bolts (3) and sealing rings (4) from front cover (5). Discard sealing rings (4).
(4)
Remove front cover (5) with oil pump (6) attached.
(5)
Remove suction pipe (7), cap screw (8), and duplex ring (9) from oil pump (6).
(6)
Install duplex ring (9), cap screw (8), and suction pipe (7) on oil pump (6).
(7)
Install front cover (5) with oil pump (6) in engine (10) and with ten sealing rings (4) and bolts (3).
(8)
Using retainer, install V-belt pulley (2).
(9)
Install nut (1) on end of crankshaft and using angle-of-turn indicator tighten nut (1) per Appendix F.
FOLLOW-ON MAINTENANCE
Install V-belts (para. 4-41).
5-148
