TM 5-4310-386-14
5-47. Power Take-Off Assembly (Cont).
Replace. (figure 5-72)
(1)
Connect suitable lifting device to PTO (1).
(2)
Remove 12 screws (2) and lockwashers (3) and remove PTO (1) and clutch assembly (4).
(3)
Using puller, remove pilot bearing (5).
(4)
Loosen fitting nut (6) and remove grease line (7).
(5)
Bend out lockwasher (8) and remove nut (9), lockwasher (8), and clutchassembly (4).
(6)
Install clutch assembly (4) and secure with lockwasher (8) and nut (9).
(7)
Install pilot bearing (5).
(8)
Install grease line (7) and tighten fitting nut (6).
(9)
Install PTO (1) and clutch assembly (4) and secure with 12 screws (2) and lockwasher (3).
5-198
