TM 5-4310-386-14
5-48.
Clutch Assembly
This task covers:
a.
Replace
INITIAL SETUP
Tools
Equipment Condition
General Mechanic's Tool Kit
Compressor unit shut down (para. 2-13).
(NSN 5180-00-177-7033)
Compressor drive belts and pulley removed
Puller Kit, Mechanical (NSN 5120-00-033-5606)
(para. 4-20).
Materials/Parts
Clutch Assembly
Replace. (figure 5-73)
(1)
Connect suitable lifting device to PTO housing (1).
(2)
Remove 12 screws (2) and lockwashers (3) and remove PTO housing (1) and clutch assembly (4).
(3)
Using puller, remove pilot bearing (5).
(4)
Loosen fitting nut (6) and remove grease line (7).
(5)
Bend out lockwasher (8) and remove nut (9), lockwasher (8), and clutch assembly (4).
(6)
Install clutch assembly (4) and secure with lockwasher (8) and nut (9) and bend up lockwasher (8).
(7)
Install grease line (7) and tighten fitting nut (6).
(8)
Install pilot bearing (5).
(9)
Install PTO housing (1) and secure with 12 screws (2) and lockwasher (3).
FOLLOW-ON MAINTENANCE
Install drive belts and pulley (para. 4-20).
5-200