TM 5-4310-386-14
4-19. Controls and Indicators (Cont).
(10) Throttle control. (figure 4-19)
(a) Loosen two nuts (1) and remove end fitting (2) from lever (3).
(b) Remove nut (4) and washer (5).
(c) Remove throttle cable (6) from bracket (7) and from throttle control (8).
(d) Remove nut (9) and lockwashers (10) and remove throttle control (8) from bracket (11).
(e) Install throttle control (8) and secure with lockwasher (10) and nut (9).
(f) Install throttle cable (6) on throttle control (8) and through bracket (7).
(g) Install washer (5) and nut (4).
(h) Install end fitting (2) in lever (3) and tighten two nuts (1).
4-50
