TM 5-4310-387-14
4-24. Fuel Lines and Filter.
This task covers:
Replace
INITIAL SETUP
Tools
Materials/Parts (Cont)
General Mechanic's Tool Kit (NSN 5180-00-177-7033)
Fuel Supply Lines
Injector Pump Overflow Line
Materials/Parts
Injector Overflow Line
Rags, Wiping (Item 19, Appendix E)
Fuel Filter
High Pressure Fuel Lines
Replace.
(1) Fuel supply lines and filter assembly. (figure 4-17)
(a) Remove nut (1) securing wire bracket (2).
(b) Remove fuel line (3) from tank (4) and drain fuel into clean suitable container.
(c) Remove wire bracket (2) from fuel line (3).
(d) Remove fuel line (5) from pump (6).
(e) Remove two fuel lines (3) and (5) from filter (7).
(f) Replace filter (7) if more than 100 hours of operation have been placed on compressor.
(g) Install new fuel lines (3) and (5) on filter (7).
(h) Connect fuel line (5) to injector pump (6).
(i) Install wire bracket (2) on fuel line (3).
(j) Connect fuel line (3) to tank (4).
(k) Install wire bracket (2) and secure with nut (1).
(I) Replenish fuel supply.
4-40
