TM 5-4310-387-14
4-24. Fuel Lines and Filter (Cont)
(2) High pressure fuel line. (figure 4-18)
(a)
Loosen nut (1) and remove clamp (2) and seam protector (3).
(b)
Remove two nuts (4), muffler (5), bracket (6) and gasket (7).
(c)
Loosen two connector nuts (8) and remove high pressure fuel line (9).
(d)
Inspect gasket (7) and replace if cracked or missing pieces.
(e)
Install high pressure fuel line (9) and tighten two connector nuts (8).
(f)
Install gasket (7), bracket (6), muffler (5) and secure with two nuts (4).
(g)
Install seam protector (3), clamp (2) and tighten nut (1).
4-42
