TM-5-4310-389-14
b
Remove the metal filter from inside the bowl (2).
c
Pour out the old oil. Rinse bowl with solvent and add new oil up to the bead mark. The oil should be the same
as used in the engine.
WARNING
Eye protection/face shield must be worn when using compressed air for drying. Never use
compressed air over 35 psi line pressure for drying. Clear immediate area of personnel.
d
Clean the metal filter (4). Using solvent and a brush, blow dry with compressed air.
e
Install metal filter (4) inside of bowl (2).
f
Position bowl and filter assembly under filter housing (1). Secure clips (3) in place.
REPLACE REPAIR
a
Remove two bolts attaching air cleaner assembly to intake manifold.
b
Remove oil bath air cleaner assembly.
c
Reinstall air cleaner assembly and two bolts. Tighten bolts securely.
3-56
