TM-5-4310-389-14
3-32 INTAKE MANIFOLD (ENGINE).
DESCRIPTION
This task covers:
Repair
INITIAL SETUP
Tools:
Equipment conditions:
General Mechanic Tool Kit
Engine secured (paragraph 2-11).
Oil bath air cleaner removed (paragraph 3-31)
Materials/parts:
2 Manifold gaskets (0223-0704)
Gasket (01 12-0870)
Grease, item 18 Appendix E
NOTE
Only remove an intake if found damaged or if suspected of leaking.
INSPECT
a
Check the intake manifold for visible cracks or damage.
b
Check intake manifold studs and oil bath air cleaner bolts for loose or missing nuts.
c
Check for missing or broken gaskets.
REPAIR
a
Remove muffler guard from frame. Remove ether injection connection.
b
Remove four nuts (2) that secure intake manifold (1) to engine (figure 3-31).
c
Remove manifold and discard gaskets.
d
Clean sealing surfaces and apply a light coat of grease.
e
Install gaskets and place manifold on the studs.
3-57
