TM 5-4310-389-14
3-44 INSTRUMENTS AND CONTROL PANEL ASSEMBLY (GAUGES).
DESCRIPTION
This task covers:
Inspect
Repair
INITIAL SETUP
Tools:
Equipment conditions:
General Mechanic Tool Kit
1. Compressor unit secured (paragraph 2-11).
2. Bleed system of air (paragraph 2-3, b).
Materials/parts:
Lint-free cloth, item 9 Appendix E
Tape, item 30 Appendix E
Bag, item 6 Appendix E
INSPECT
a.
Remove rear cover. Inspect for loose hardware gauge mounting and fittings.
CAUTION
Liquid filled gauges should be replaced with identical unit and damaged gauge should be returned to
the manufacturer for repair and recalibration.
b.
If gauges are cracked or physically damaged, replace as required.
REPAIR
WARNING
Due to the sensitive nature of the pressure gauges and other various compressor controls, they must
be replaced as a unit and calibrated by General Support Maintenance.
3-81
