TM 5-4310-393-14
b.
Adjust Drive V-belt Adjust the drive V-belt tension by loosening the engine hold down bolts and sliding the engine
toward or away from the compressor as needed to allow % inch slack in the belt when depressed at the center distance
between the engine and compressor. Retighten engine hold-down bolts.
c.
Check engine crankcase oil level (paragraph 3-4).
d.
Check compressor crankcase oil level (paragraph 3-5.2).
WARNING
DEATH OR SERIOUS INJURY COULD OCCUR IF FUEL IS NOT HANDLED
CAREFULLY. USE IN A WELL VENTILATED AREA AWAY FROM OPEN FLAME,
ARCING EQUIPMENT, IGNITION SOURCES, HEATERS OR EXCESSIVE HEAT.
ENGINE MUST BE TURNED OFF AND COOL BEFORE REFUELING. USE PROPER
REFUELING PROCEDURES AND EQUIPMENT TO AVOID SPILLAGE. DO NOT RUN
ENGINE NEAR OPEN FUEL CONTAINERS. DO NOT SMOKE.
e.
Check fuel level. Add diesel fuel if needed.
3-8
