TM 5-4310-393-14
4-15.
FUEL FILTER.
This task covers A. Replace
Tools:
Materials/Parts:
Tool Kit, General Mechanic's Set
Tape, Masking NSN 7510-00-283-0612
Filter, Fuel P/N 00329102
Equipment Conditions:
Unit Must Be Cool:
Fuel Tank Empty
Well Ventilated Area
A.
Replace.
1.
Removing the Fuel Filter.
a.
Disconnect gravity feed line (Figure
4-12, Item 1) at the pump end and drain fuel tank into a
suitable container. Reconnect fuel line (1) to pump
b. Remove banjo bolt (2) and ring
piece (3) and washers (4) Apply closures to open end of
fuel line.
c.
Remove four cap screws (5) from
filter mounting plate (6). Remove and discard fuel filter
assembly (7).
2.
Installing the Filter.
a.
Remove closures from fuel lines and
replace fuel filter with new part in reverse order of
removal
Figure 4-12. Fuel Filter
4-16.
PURIFICATION CYLINDER.
This task covers: A. Replace
Tools:
Materials/Parts:
Tool Kit, General Mechanic's Set
Non-ionic Detergent, NSN 7930-00-282-9699
7/16" Deep Well Socket
Distilled Water, NSN 6810-00-297-9540
Equipment Conditions:
Compressor Secured
Pressure Purge From System
A.
Replace
1.
Replacing the Purification Cylinder.
NOTE
Replace the purification cylinder with an identical unit only.
a. Purge all pressure (paragraph 2-3) from the system by opening purge valve.
b.
Disconnect inlet and outlet air lines from the bottom of the cylinder.
4-29