TM 5-4310-451-14
4-32.
OIL PAN AND MAGNETIC PLUG REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Center bottom cover removed (see paragraph 4-81).
Adhesive (Item 1, Appendix E)
Two gaskets
Tools/Test Equipment:
Twenty-four lockwashers
General mechanic's tool kit
Common no. 1 shop set
a.
REMOVAL
1.
Remove magnetic plug (5) and drain oil into suitable container.
2.
Remove gasket (4) from magnetic plug (5). Discard gasket.
3.
Remove 24 bolts (6), lockwashers (7), oil pan (3), and gasket (1) from engine block (8). Discard lockwashers and
gasket.
4-32