TM 5-4310-451-14
4-45. OIL COOLER ELBOW AND HOSE REPLACEMENT (Con’t).
b. INSTALLATION
1.
Install two plugs (2) in elbow (5).
2.
Install new gasket (8) and elbow (5) on oil cooler (9) with three new lockwashers (7) and bolts (6).
3.
Place two clamps (3) on hose (4) and install hose to elbow (5) and water pump (1).
4.
Position two clamps (3) on elbow (5) and water pump (1) and tighten.
FOLLOW-ON TASKS:
áFill cooling system with coolant (see Lubrication Instructions, Chapter 3, Section I).
áStart engine (see paragraph 2-10) and check for leaks.
TA704760
4-86
