TM 5-4310-451-14
4-80. ENGINE OIL PRESSURE GAGE AND HOSE REPLACEMENT (Con’t).
2.
Remove valve (2), adapter (3), and sensor (9) from tee (8).
3.
Remove tee (8) from gage (8).
4.
Remove two nuts (4), bracket (5), and gage (6) from instrument panel (7).
1.
Install gage (6) and bracket (5) in instrument panel (7) with two nuts (4).
2.
Apply sealing compound to threads of tee (8) and install tee on gage (6).
3.
Apply sealing compound to threads of valve (2), sensor (9), and adapter (3) and install valve, sensor, and
adapter on tee (8).
4.
Apply sealing compound to threads of hose (1) at engine end and install hose on engine (10) and valve (2).
TA704847
b. INSTALLATION
4-194
