TM 5-4310-451-14
5-29. CYLINDER HEAD REPAIR.
This Task Covers:
a.
Disassembly
c.
Assembly
b.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Cylinder head removed (see paragraph 5-28).
Dry cleaning solvent (Item 38, Appendix E)
Rocker arms removed (see paragraph 5-41).
Two expansion plugs
Exhaust valve bridges removed (see paragraph
Six gaskets
5-26).
Twelve lockwashers
Exhaust valves removed (see paragraph 5-24).
Cam follower assemblies removed (see paragraph
References
5-25).
TM 9-237
Tools/Test Equipment:
General Safety Instructions:
General mechanic's tool kit
Dry cleaning solvent is flammable and must not be
Field automotive shop set
used near open flame. Use only in a well-ventilated
area.
Compressed air used for cleaning purposes should
never exceed 30 psi (207 kPa).
a. DISASSEMBLY
NOTE
Right and left bank cylinder heads are disassembled same way. This procedure covers one cylinder head.
1. Remove two screws (3), lockwashers (4), access cover (5), and gasket (6) from cylinder head (1). Discard gasket
and lockwashers.
TA704940
5-59