TM 5-4310-451-14
2-23.
FORDING (Con’t).
b.
During Fording.
(1)
At safe operating speed, carefully move across area to be forded.
(2)
Do not stop or attempt to back up.
c.
After Fording.
(1) Check oil levels of engine and air compressor, and check for water contamination. If oil levels are too high, water has
entered and oil must be replaced.
(2) Wipe dry and/or allow time to dry all electrical components and wires.
2-24.
EMERGENCY ENGINE STOPPING.
CAUTION
Emergency engine shutdown should only be used in case of emergency. Use of emergency
engine shutdown can cause oil to be sucked past oil seals and Into blower housing.
a.
Pull out emergency stop control (1) fully.
2-27
