TM 5-4310-451-14
5-64. BLOWER ASSEMBLY REPAIR (Con’t).
NOTE
Quantity of shims will differ on blowers.
9.
Tag, mark, and remove shims (20) from rotor shafts (21 and 22).
10.
Bend tangs of lockwasher (25) and remove screw (26), lockwasher, disk (24), and spacer (27) from front end plate
(23). Discard lockwasher.
11.
Remove six screws (31), lockwashers (30), and two bearing retainers (29) from front end plate (23). Discard
lockwashers.
12.
Loosen two screws (28) three turns.
TA705091
5-220
