TM 5-4310-451-14
5-64. BLOWER ASSEMBLY REPAIR (Con’t).
13.
Remove six screws (34), lockwashers (33), and
two bearing retainers (35) from rear end plate
(2). Discard lockwashers.
14.
Remove two screws (32) from rear end plate (2).
15.
Aline puller tools on rear end plate (2) and install
six y -20 UNC x 1 in. screws (36).
16.
Tighten two puller screws (19) evenly and
remove rear end plate (2) from blower housing
(1).
17.
Remove puller screws (19) and puller tools.
TA705092
5-221
