TM 5-4310-451-14
5-72. WATER PUMP MAINTENANCE (Con’t).
d. ASSEMBLY
1.
Lubricate two new bearings (35 and 36) with light
coat of lubricating oil.
NOTE
Bearings are Installed so numbered
side of bearings face each other.
2.
Install small bearing (36) on threaded end of new
shaft (30).
3.
Install large bearing (35) on other end of new
shaft (30).
CAUTION
Ensure that shaft and bearings are Installed straight Into housing. Damage to housing or bearings
may occur If bearings are not straight.
4.
Install shaft (30) and bearings (35 and 36) into
housing (24) by pressing on bearing (35).
5.
Install new retaining ring (29) in groove housing
(24).
CAUTION
Ensure that gear Is Installed straight
on shaft or gear may be damaged.
6.
Install new gear (28) on shaft (30).
7.
Apply small amount of sealing compound to
threads of plugs (31 and 34) and install in
housing (24).
5-281
