TM 5-4310-451-14
5-72. WATER PUMP MAINTENANCE.
This Task Covers:
a.
Removal
d.
Assembly
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
áFan removed (see paragraph 4-47)
áSealing compound (Item 14, Appendix E)
áGrease (Item 22, Appendix E)
Tools/Test Equipment:
áLubricating oil (Item 28, Appendix E)
áGeneral mechanic’s tool kit
áDry cleaning solvent (Item 38, Appendix E)
áField automotive shop set
áOne 5/16 in. -18 UNC x 2 in. screw
áOne repair kit
Personnel Required: Two
áFive lockwashers
General Safety Instructions:
áDry cleaning solvent is flammable and must not be used near open flame. Use only in a well-ventilated area.
a. REMOVAL
1.
Remove two screws (1), lockwashers (2),
washers (3), and move secondary fuel filter (4)
out of way. Discard lockwashers.
5-277
