TM 5-4310-451-14
5-75.
ENGINE STARTER REPAIR (Con’t).
20.
Install new oil seal (35) in lever housing (7).
21.
Install new preformed packing (34) on lever
housing (7).
22.
Soak new wick (48) with lubricating oil and install
in lever housing (7).
23.
Install cap (47) in lever housing (7).
24.
Install new small preformed packing (26) and
new large preformed packing (24) on shaft (25).
25.
Position shift lever (33) in lever housing (7).
26.
Install shaft (25) through shift lever (33).
TA705188
5-322
