TM 5-4310-451-14
5-105.
AIR COMPRESSOR OIL COOLER MAINTENANCE (Cont)
11.
Remove pipe (16) from oil cooler (1).
12.
Remove six screws (15) and oil cooler (1) from
shroud (2).
13.
If damaged, remove one pipe plug (18) each
from two tees (17 and 19).
b.
REPAIR
Repair oil cooler in accordance with TM 750-
254.
c.
INSTALLATION
1.
If removed, install one pipe plug (18) each in two
tees (17 and 19).
2.
Install oil cooler (1) in shroud (2) with six screws
(15).
NOTE
Apply sealing compound to threads
of all parts before installation.
3.
Install pipe (16) in oil cooler (1).
4.
Install tee (17) on pipe (16).
5.
Install nipple (10) In oil cooler (1).
6.
Install elbow (11), nipple (12), and elbow (13) on
nipple (10).
7.
Install pipe (14) through shroud (2) and into
elbow (13).
8.
Install tee (19) on pipe (14).
WARNING
Use extreme caution when handling heavy parts. Lifting device Is required when parts weigh over
50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two person lift, and over 150 lb (68 kg)
for a three or more person lift. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause serious injury or death to personnel.
9.
Using suitable lifting device, position oil cooler (1) and shroud (2) in air compressor unit.
TA705239
5-391