TM 5-4310-451-14
5-104.
MINIMUM PRESSURE VALVE REPLACEMENT (Cont).
c.
INSTALLATION
1.
Apply sealing compound to threads of nipple (23) and adapter (9) and install nipple, elbow (24), and adapter on
adapter (22).
2.
Install pipe plug (21) and new preformed packing (25) in adapter (22).
3.
Position new gasket (27), new preformed packing (26), adapter (22), new preformed packing (20), new gasket
(19), and housing (4) on oil separator (28).
4.
Apply adhesive to four bolts (16) and install bolts in housing (4).
5.
Install new seal ring (17) on piston (18).
6.
Coat piston (18) and seal ring (17) with grease and install piston in housing (4).
7.
Position outer spring (15) and inner spring (14) in housing (4).
TA705235
5-387