TM 5-4310-451-14
4-29.
ROCKER ARM COVERS REPLACEMENT (Con’t).
a.
REMOVAL
NOTE
Left and right rocker arm covers are removed same way. This procedure covers left rocker arm
cover.
1.
Remove two bolts (2), washers (3), resilient mounts (4), rocker arm cover (9), and gasket (8) from engine
(1).
Discard gasket.
2.
Remove two screws (5), retainer plate (6), and identification plate (7) from rocker arm cover (9).
b.
INSTALLATION
NOTE
Left and right rocker arm covers are installed same way. This procedure covers left rocker arm
cover.
1.
Install identification plate (7) on rocker arm cover (9) with retainer plate (6) and two screws (5).
2.
Install new gasket (8) and rocker arm cover (9) on engine (1) with two resilient mounts (4), washers (3), and bolts
(2).
FOLLOW-ON TASKS:
•
Install primary fuel filter and bracket (right rocker arm cover only) (see paragraph 4-34).
•
Start engine (see paragraph 2-10) and check for leaks around gasket.
TA704708
4-24
