TM 5-4310-451-14
4-30.
ENGINE BREATHER REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
•General mechanic's tool kit
a.
REMOVAL
1.
Remove clamp (6) and hose (7) from breather tube (3).
2.
Remove screw (8), spacer (2), and clamp (9) from breather tube (3).
3.
Remove two clamps (4), breather tube (3), and hose (5) from engine block (1).
b.
INSTALLATION
1.
Install hose (5) on engine block (1).
2.
Slide two clamps (4) over hose (5).
3.
Install breather tube (3) into hose (5) and slide one clamp (4) over hose and breather tube.
4.
Install clamp (9) over breather tube (3) and secure to engine block (1) with spacer (2) and screw (8).
5.
Install hose (7) on breather tube (3) with clamp (6).
TA704709
4-25/(4-26 Blank)
