TM 5-4310-452-14
4-36. ALTERNATOR REPLACEMENT (Con't).
6. Remove bolt (15), lockwasher (14), flatwasher (13), and spacer (12) from alternator (17) and alternator bracket (16).
Discard lockwasher.
7. Remove capscrew (30), flatwasher (29), sleeve bushing (28), spacer (27), lockwasher (24), and nut (25) from
alternator (17). Discard lockwasher.
8.
Remove alternator (17).
9.
Remove nut (8) and lockwasher (9). Discard lockwasher.
10. Pry pulley (31) from alternator (17).
11. Remove screw (10), washer (11), and alternator bracket (16).
c.
INSTALLATION
1.
Position alternator bracket (16) in place and install screw (10) and washer (11).
2.
Position pulley (31) on alternator (17) shaft and install new lockwasher (9) and nut (8).
3.
Position alternator (17) in place and install capscrew (30), flatwasher (29), sleeve bushing (28), spacer (27), new
lockwasher (24), and nut (25).
TA505464
4-75
