TM 5-4310-452-14
4-39. STARTER MOTOR REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Engine off.
• Five lockwashers
• Battery cables disconnected (see paragraph
4-57).
Tools/Test Equipment:
• Right door assembly open.
• General mechanic's tool kit
a.
REMOVAL
1.
Remove nut (10), lockwasher (9), battery cable (8), and electrical lead (7) from solenoid terminal (6), Discard
lockwasher.
2.
Remove capscrew (11). clamp (12), and electrical lead (13) from solenoid (5).
3.
Remove nut (14), lockwasher (15), and ground strap (16) from solenoid terminal (17). Discard lockwasher.
4. Remove 3 bolts (3) and lockwashers (2), and remove starter (1) from flywheel housing. Discard lockwashers.
NOTE
If solenoid is damaged or defective, perform step 5.
5. Remove 3 screws (4) and remove solenoid (5) from starter (1),
4-80
