TM 5-4310-452-14
4-87. OIL SEPARATOR FILTER ELEMENT REPLACEMENT (Con't).
b. INSTALLATION
1.
Install new oil separator filter element (6) in oil separator (5).
2.
Install access cover (4) and 8 screws (3) on oil separator (5). Tighten screws to 50 lb. -ft. (67.8 N•m) (see
Appendix F for tightening sequence).
3.
Connect discharge air tube (8) to elbow (7).
4.
Tighten manifold end of discharge air tube (8).
5.
Connect oil line (1) to check valve (2).
6.
Check oil separator oil level. Add oil only if oil level is not visible in sight glass when engine is not running (see
LO 5-4310-452-12).
FOLLOW-ON TASKS:
• Start engine and check for leaks (see paragraph 2-12).
• Close access door assembly.
4-175
