TM 5-4310-452-14
4-91. COMPRESSOR FAN BELT REPLACEMENT.
THIS TASK COVERS
a. Removal
b. Installation
INITIAL SETUP
Equipment Conditions:
Materials/Parts:
• Engine off.
• Four self-locking screws
• Left and right door assemblies open.
• Compressor air cleaner filter element removed
Tools/Test Equipment:
(see paragraph 3-4).
• General mechanic's tool kit
• Compressor air cleaner assembly removed (see
paragraph 4-89).
a. REMOVAL
1.
Remove 4 self-locking screws (1) and fan guard (7) from fan shroud (2). Discard self-locking screws.
2.
Remove fan belt (4) from pulleys (3, 5, and 6).
3.
Inspect fan belt (4) for wear, cracks, or frayed condition. Replace if necessary.
b. INSTALLATION
1.
Install fan belt (4) on pulleys (3, 5, and 6).
2.
Install fan guard (7) on fan shroud (2) with 4 new self-locking screws (1).
TA505540
4-184
