TM 5-4310-452-14
4-92. COMPRESSOR FAN AND FAN DRIVE MAINTENANCE (Con't).
11.
Install pulley (21), 2 flatwashers (22), capscrew (23), and new self-locking nut (16) on idler lever assembly (17).
12.
Position fan (8) on hub (7) and install 6 screws (9).
d. INSTALLATION
CAUTION
Use care when installing fan bearing housing support on fan shroud. Striking fan against fan
shroud can result in bent fan blades or damage to fan shroud.
1.
Position fan bearing housing support (2) in place on fan shroud (3) and install 4 screws (1) and nuts (4).
FOLLOW-ON TASKS:
Install compressor fan belt (see paragraph 4-91).
Close left and right door assemblies.
TA505543
4-189